View SMT15E-12W3V3J_4344661.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Embedded Power for Business-Critical Continuity
SMT15E Series
3.0-5.5 Vin single output
Rev.06.26.07 SMT15E_05 1 of 4
Total Power: 41.25W Input Voltage: 3.0-5.5 Vdc # of Outputs: Single
Special Features
* 15 A current rating * Input voltage range: 3.0 Vdc to 5.5 Vdc * Output voltage range: 0.8 Vdc to 3.63 Vdc * Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout * Extremely low internal power dissipation * Minimal thermal design concerns * Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * Available RoHS compliant * 2 year warranty
Safety
UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TUV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1
The SMT15E series are non-isolated dc-dc converters packaged in a surface-mount footprint giving designers a cost effective solution for conversion from either a 3.3 Vdc or 5 Vdc input to output voltages of 0.8 Vdc and 3.63 Vdc. The SMT15E offers a range of fixed outputs (and one wide trim output unit) at an industry leading 15 A which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SMT15E series from existing 3.3 Vdc or 5 Vdc system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SMT15E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT15E offers compact size and efficiencies of up to 96%.
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev.06.26.07 SMT15E_05 2 of 4
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise (0 to 20 MHz BW) Temperature co-efficient Transient response Fixed output versions Wide trim version 10% 0.8-3.63 Vdc 0.4% 0.2% 1.0% 0A None 60 mV pk-pk 25 mV rms max. 0.01%/C 60 mV max. deviation 50 s recovery to within 1.0% 10% Vo compensation
EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight Coplanarity (LxWxH) Fixed See table Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches 6.3 g (0.22 oz) 100 m Telcordia SR-332 MIL-HDBK-217F 7,042,000 hours 680,000 hours EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3
Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input current ripple Remote ON/OFF Start-up time No load
MTBF 3.0-5.5 Vdc 70 mA typ. 11.8 A max. @ Io max. and Vout = 3.63 V 110 mA rms (See Note 2) 20 ms PROTECTION Short-circuit Thermal
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 3) Operating ambient, temperature Non-operating -40 C to +100 C -40 C to +125 C
Continuous Automatic recovery
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev.06.26.07 SMT15E_05 3 of 4
OUTPUT POWER (MAX.) 41.25 W 54.45 W 54.45 W
INPUT VOLTAGE 3.0-5.5 Vdc 4.5-5.5 Vdc 3.0-5.5 Vdc
OUTPUT VOLTAGE 2.5 Vdc 3.3 Vdc 0.8-3.63 Vdc
OUTPUT CURRENT (MIN.) 0A 0A 0A
OUTPUT CURRENT (MAX.) 15 A 15 A 15 A
EFFICIENCY (TYP.) 93.5% 95% 95%
(4)
REGULATION LINE 0.2% 0.2% 0.2% LOAD 1.0% 1.0% 1.0%
MODEL NUMBER (5,6) SMT15E-05S2V5J SMT15E-05S3V3J SMT15E-05W3V3J
Part Number System with Options
S M T 1 5 E- 0 5 W 3 V 3 -T J
Packaging Options (5) No `-T' Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT15E-05W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT15E-05W3V3-TJ
Product Family SMT = Surface Mount Rated Output Current 15 = 15 Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0 Vdc to 5.5 Vdc
Output Voltage 0.8 Vdc to 3.63 Vdc Type of Output S = Single W = Wide
Output Voltage Adjustment of the SMT15E-05W3V3J Series
The ultra-wide output voltage trim range offers major advantages to users who select the SMT15E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT15E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3 V.
* When Vin 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc * When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc
Notes
1 2 When Vin 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc. When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc. The SMT15E features a `Negative Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT15E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >1.2 V] Converter Operation Unit is ON Unit is ON Unit is OFF
3 4 5 6
A `Positive Logic' Remote ON/OFF version is also possible with this converter. To order please place the suffix `-R' at the end of the model number, e.g. SMT15E-05S3V3-RJ. Full derating curves available in both the Longform Datasheet and Application Note 136. When the unit is trimmed down to 0.8 V, the efficiency is 82.5% TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
Embedded Power for Business-Critical Continuity
Rev.06.26.07 SMT15E_05 4 of 4
Americas
TOP VIEW 0.039 (1.00) 0.039 (1.00) 0.530 0.010 (13.46 0.25)
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698
BOTTOM VIEW
1.3000.010 (33.02 0.25)
0.310 (7.87)
0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 5 4 3 2
Europe (UK)
0.297 (7.54) 0.405 (10.29)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
0.075 (1.91)
0.430 (10.92)
6 SIDE VIEW 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance Seating Plane 0.048 (1.22)
1
Asia (HK)
16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
Max. component Connector (6PL) Width :0.112 0.003 (2.84 0.08) Length: 0.062 0.002 (1.57 0.04) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
For global contact, visit:
www.powerconversion.com technicalsupport@powerconversion.com
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FUNCTION Remote ON/OFF Remote Sense + Trim +Vout Ground +Vin
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.

▲Up To Search▲

Price & Availability of SMT15E-12W3V3J

	To Download SMT15E-12W3V3J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .